Villa Tanjung Lesung

Putting in Parquet Flooring

Parquet

The timeless attractiveness of classic Parquet flooring never ages or go's away from vogue. It's special attractiveness and flexibility implies it can arrive in several different styles and colours.

When installing original parquet flooring the first issue you must examine is the dampness of the sub -floor foundation, this must be underneath 5%. The 2nd issue is parquet flooring likes for being laid with a stage surfaces the, the more the floor degree is out the more likelihood you're going to have of gaps when laying. Now on to gluing the parquet flooring down use either a bicthem primarily based glue like f21 or a far more present day glue like sika that is a (ms polymer), Ideally the second but the two are satisfactory.

Usually fitters tend to work with bitchem on aged flooring as this will react using the present old bitching that is already down not to mention the value of a ms polymer which can be three moments the cost. Each will do same job for example them old flooring which have been down a long even though they all utilized bitchem in them times and there forty fifty several years aged.When glueing down the block its good to try and make sure there is absolutely no gaps, but gaps or not the tip of the globe because the total ground is going to be loaded having a filler which is made up of resin and sawdust from you ground as soon as sanded.

After flooring is laid sand ground in the 50-60 grit for new blocks along with a lower grit 0f 18- 36 grit for relaimed flooring. Then mix the saw dust with resin and fill the complete flooring twice. Then sand the complete ground once more and again and once more going up the grits every time. Then ending on the 120 grit throughout. thoroughly clean the place and ground making certain all dust is up.tack the floor by using a tack fabric ensure all dust is up.

Then roll on the primer wait around several hours to dry then roll on a laquer leave over night to dry and treatment. Last but not least scrim the floor in a good grit sand paper or monitor, clean effectively and tack once more, then implement the ultimate coat of laquer. You'll be able to use a lot more coats the more coats you implement the more time the end should final as well as the a lot more depth along with the finer the end approximately 7 coats.